求助:GAMBRO AK95S CCFM 020 015

stanley16 · 发表于 2011-12-25 15:46:17

如题：GAMBRO AK95S CCFM 020 015，期间不断 FLUID PATH OBSTRUCTION，请问如何解决？？？

yj7107 · 发表于 2012-2-1 23:47:35

反复除钙，不行的话可能要换控制驱动板，我们换过

stanley16 · 发表于 2012-2-9 13:38:22

坏消息， UF CELL 需要更换，价钱还蛮给力。

baobei · 发表于 2012-3-20 17:11:46

按RESET或许可以解决

林家三少 · 发表于 2012-4-1 22:26:30

Some possible explanations why the error has occurred:
- Air is flowing through flow channel 1. There is too much air in the inlet water
- Valves: RIVA, ZEVA, diva or TAVA are leaking
- Flow cell: the flow cell is dirty.
- Flow cell: the flow cell is broken
- Flow restrictor: the restrictor is dirty
- Flow pump: the pump is not working properly
- Degassing chamber: the o-ring at the top of the chamber is not in its correct
position. fluid is leaking.
- Degassing pressure transducer: not working properly.
不需要翻译了吧？

陈伟 · 发表于 2012-5-23 15:21:02

那就要清洗了，多洗洗就好了，实在不行就要换超滤单元了

PDEAN · 发表于 2019-7-5 09:06:22

能翻译一下，最好。。

[故障求助] 求助:GAMBRO AK95S CCFM 020 015

发表回复